结构陶瓷

结构陶瓷 (2012 ~ 2021)

点击查阅本刊2022年及之后发表的同主题论文

Lu J, Ni D, Liao C, et al. Fabrication and microstructure evolution of C_sf/ZrB₂-SiC composites via direct ink writing and reactive melt infiltration. Journal of Advanced Ceramics, 2021, 10 (6): 1371-1380.

Li M, Cheng L, Ye F, et al. Formation of nanocrystalline graphite in polymer-derived SiCN by polymer infiltration and pyrolysis at a low temperature. Journal of Advanced Ceramics, 2021, 10 (6): 1256-1272.

Yu L, Liu H, Fu Y, et al. Design and preparation of an ultra-high temperature ceramic by in-situ introduction of Zr₂[Al(Si)]₄C₅ into ZrB₂-SiC: Investigation on the mechanical properties and oxidation behavior. Journal of Advanced Ceramics, 2021, 10 (5): 1082-1094.
品味“仙桃” | 原位Zr₂[Al(Si)]₄C₅复合ZrB₂-SiC超高温陶瓷及其力学性能和氧化行为

Du B, Cheng Y, Xun L, et al. Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure. Journal of Advanced Ceramics, 2021, 10 (4): 871-884.

Long X, Wu Z, Shao C, et al. High-temperature oxidation behavior of SiBN fibers in air. Journal of Advanced Ceramics, 2021, 10 (4): 768-777.
品味“仙桃” | SiBN陶瓷纤维在空气中的高温氧化行为

Song C, Liu Y, Ye F, et al. Enhanced mechanical property and tunable dielectric property of SiC_f/SiC-SiBCN composites by CVI combined with PIP. Journal of Advanced Ceramics, 2021, 10 (4): 758-767.

Lun H, Zeng Y, Xiong X, et al. Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)C_x carbide solid solution powders in air. Journal of Advanced Ceramics, 2021, 10 (4): 741-757.

He R, Zhou N, Zhang K, et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 2021, 10 (4): 637-674.
品味“仙桃” | SiC陶瓷材料增材制造进展与挑战

Fan X, Ma Y, Deng Y, et al. Microstructure and mechanical properties of Zr₃Al₃C₅-based ceramics synthesized by Al–Si melt infiltration. Journal of Advanced Ceramics, 2021, 10 (3): 529-536.
品味“仙桃” | 反应熔体渗透工艺制备Zr₃Al₃C₅基复相陶瓷

Qiu B, Duan X, Zhang Z, et al. Microstructural evolution of h-BN matrix composite ceramics with La–Al–Si–O glass phase during hot-pressed sintering. Journal of Advanced Ceramics, 2021, 10 (3): 493-501.
品味“仙桃” | La-Al-Si-O玻璃相增强的h-BN基复相陶瓷热压烧结过程中组织结构演化

Xiang H, Xing Y, Dai FZ, et al. High-entropy ceramics: Present status, challenges, and a look forward. Journal of Advanced Ceramics, 2021, 10 (3): 385-441.
品味“仙桃” | 高熵陶瓷的研究现状、面临的挑战与未来发展方向

Wang J, Cao L, Zhang Y, et al. Effect of mass transfer channels on flexural strength of C/SiC composites fabricated by femtosecond laser assisted CVI method with optimized laser power. Journal of Advanced Ceramics, 2021, 10 (2): 227-236.
品味“仙桃” | 传质通道优化对飞秒激光辅助CVI工艺制备的C/SiC复合材料弯曲强度的影响

Zhao D, Guo T, Fan X, et al. Effect of pyrolytic carbon interphase on mechanical properties of mini T800-C/SiC composites. Journal of Advanced Ceramics, 2021, 10 (2): 219-226.
品味“仙桃” | 热解碳界面层厚度对T800-C/SiC力学性能的影响

Zhang Y, Sun SK, Guo WM, et al. Optimal preparation of high-entropy boride-silicon carbide ceramics. Journal of Advanced Ceramics, 2021, 10 (1): 173-180.
品味“仙桃” | 高熵硼化物-碳化硅陶瓷的优化制备

Chen B, Ding Q, Ni D, et al. Microstructure and mechanical properties of 3D C_f/SiBCN composites fabricated by polymer infiltration and pyrolysis. Journal of Advanced Ceramics, 2021, 10 (1): 28-38.
品味“仙桃” | 基于前驱体浸渍裂解制备的3D C_f/SiBCN复合材料微结构与力学性能

点击查阅本刊2022年及之后发表的同主题论文

论文分类推荐为便于读者查找感兴趣的论文，本刊对2022年1月 (第11卷第1期) 以来发表的论文按研究内容进行了分类 (分类不一定准确，仅供参考)。如果您对某一研究内容感兴趣，请点击下方左侧相应链接进入论文题目列表 (为便于读者使用，我们还准备了每月更新一次的分类目录 MS-WORD版供读者下载)。此外，您也可以访问 https://www.sciopen.com/journal/2226-4108可以查阅并下载本刊创刊以来发表的所有论文，或转至总目录页面通过关键词搜索您感兴趣的论文。您在使用本分类目录的过程中，如果发现存在分类不准确、链接错误或不可用等，请及时联系本刊执行主编龚江宏(e-mail: jac@tsinghua.edu.cn或微信13801256332)。如果您有设立新分类类别的建议，也请随时与本刊执行主编联系。尤其是，本目录中所列论文的作者如果觉得自己的论文所在分类不准确或者可以出现在其他更多的分类中，欢迎随时向本刊执行主编提出建议。
01 综述论文 02 高熵陶瓷的制备工艺及性能 03 增材制造及3D/4D打印技术 04 结构陶瓷 05 热障涂层、环境障涂层及其他保护性涂层 06 隔热陶瓷 07 高导热陶瓷 08 透波与吸波 09 透明与发光 10 MAX、MAB、MXenes 及相似二维材料 11 多孔陶瓷与多孔无机膜 12 介电、压电、铁电 13 磁性材料 14 纳米功能材料 15 功能性薄膜 16 电池材料 (电解质、电极等) 17 热电材料 18 催化及有机物降解材料 19 敏感陶瓷 (气敏、NTC、Varistor) 20 核能相关陶瓷材料 21 生物材料 22 聚合物先驱体陶瓷 23 粉体、纤维、晶须 24 玻璃与玻璃陶瓷 25 地聚物陶瓷 26 陶瓷工艺技术 27 涉及材料计算的论文	如果您对某一篇论文感兴趣，请点击论文题目直接进入SciOpen网站该论文所在页面下载论文全文电子版。部分论文的题目下方还给出了“特陶人”公众号上曾经发表的该文的中文推广材料，供点击阅读。有些论文还没有相应的“品味仙桃”中文推广材料。请这些论文的作者尽可能提供中文推广材料 (已经提交的将在公众号连续发出，一个月内未发出的请及时联系期刊执行主编)。此外，如果您愿意为境外作者的某一篇或多篇论文撰写“品味仙桃”，我们不胜感激。
	结构陶瓷 (2012 ~ 2021) 点击查阅本刊2022年及之后发表的同主题论文 Lu J, Ni D, Liao C, et al. Fabrication and microstructure evolution of C_sf/ZrB₂-SiC composites via direct ink writing and reactive melt infiltration. Journal of Advanced Ceramics, 2021, 10 (6): 1371-1380. Li M, Cheng L, Ye F, et al. Formation of nanocrystalline graphite in polymer-derived SiCN by polymer infiltration and pyrolysis at a low temperature. Journal of Advanced Ceramics, 2021, 10 (6): 1256-1272. Yu L, Liu H, Fu Y, et al. Design and preparation of an ultra-high temperature ceramic by in-situ introduction of Zr₂[Al(Si)]₄C₅ into ZrB₂-SiC: Investigation on the mechanical properties and oxidation behavior. Journal of Advanced Ceramics, 2021, 10 (5): 1082-1094. 品味“仙桃” \| 原位Zr₂[Al(Si)]₄C₅复合ZrB₂-SiC超高温陶瓷及其力学性能和氧化行为 Du B, Cheng Y, Xun L, et al. Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure. Journal of Advanced Ceramics, 2021, 10 (4): 871-884. Long X, Wu Z, Shao C, et al. High-temperature oxidation behavior of SiBN fibers in air. Journal of Advanced Ceramics, 2021, 10 (4): 768-777. 品味“仙桃” \| SiBN陶瓷纤维在空气中的高温氧化行为 Song C, Liu Y, Ye F, et al. Enhanced mechanical property and tunable dielectric property of SiC_f/SiC-SiBCN composites by CVI combined with PIP. Journal of Advanced Ceramics, 2021, 10 (4): 758-767. Lun H, Zeng Y, Xiong X, et al. Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)C_x carbide solid solution powders in air. Journal of Advanced Ceramics, 2021, 10 (4): 741-757. He R, Zhou N, Zhang K, et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 2021, 10 (4): 637-674. 品味“仙桃” \| SiC陶瓷材料增材制造进展与挑战 Fan X, Ma Y, Deng Y, et al. Microstructure and mechanical properties of Zr₃Al₃C₅-based ceramics synthesized by Al–Si melt infiltration. Journal of Advanced Ceramics, 2021, 10 (3): 529-536. 品味“仙桃” \| 反应熔体渗透工艺制备Zr₃Al₃C₅基复相陶瓷 Qiu B, Duan X, Zhang Z, et al. Microstructural evolution of h-BN matrix composite ceramics with La–Al–Si–O glass phase during hot-pressed sintering. Journal of Advanced Ceramics, 2021, 10 (3): 493-501. 品味“仙桃” \| La-Al-Si-O玻璃相增强的h-BN基复相陶瓷热压烧结过程中组织结构演化 Xiang H, Xing Y, Dai FZ, et al. High-entropy ceramics: Present status, challenges, and a look forward. Journal of Advanced Ceramics, 2021, 10 (3): 385-441. 品味“仙桃” \| 高熵陶瓷的研究现状、面临的挑战与未来发展方向 Wang J, Cao L, Zhang Y, et al. Effect of mass transfer channels on flexural strength of C/SiC composites fabricated by femtosecond laser assisted CVI method with optimized laser power. Journal of Advanced Ceramics, 2021, 10 (2): 227-236. 品味“仙桃” \| 传质通道优化对飞秒激光辅助CVI工艺制备的C/SiC复合材料弯曲强度的影响 Zhao D, Guo T, Fan X, et al. Effect of pyrolytic carbon interphase on mechanical properties of mini T800-C/SiC composites. Journal of Advanced Ceramics, 2021, 10 (2): 219-226. 品味“仙桃” \| 热解碳界面层厚度对T800-C/SiC力学性能的影响 Zhang Y, Sun SK, Guo WM, et al. Optimal preparation of high-entropy boride-silicon carbide ceramics. Journal of Advanced Ceramics, 2021, 10 (1): 173-180. 品味“仙桃” \| 高熵硼化物-碳化硅陶瓷的优化制备 Chen B, Ding Q, Ni D, et al. Microstructure and mechanical properties of 3D C_f/SiBCN composites fabricated by polymer infiltration and pyrolysis. Journal of Advanced Ceramics, 2021, 10 (1): 28-38. 品味“仙桃” \| 基于前驱体浸渍裂解制备的3D C_f/SiBCN复合材料微结构与力学性能点击查阅本刊2022年及之后发表的同主题论文
京公网安备 11010802037371号京ICP备05082739号